{"title":"Projects","description":"","products":[{"product_id":"part-built-2-inch-scale-burrell-gold-medal-tractor-stock-code-1706","title":"Part-built 2 inch scale Burrell Gold Medal tractor","description":"2 inch scale model of the Burrell 5 ton Gold Medal steam tractor. The  original, works number 3846 was built in 1920.  \u003cp\u003eBased on the design produced by MJ Engineering of Ringwood, Hampshire, the  engine is an accurate scale model of the original compound tractor. Castings are  still available for the engine, a full set of drawings and the comprehensive  builders manual is included. All  remaining work is well within the capacity of a 3 1\/2 inch lathe.\u003c\/p\u003e  \u003cp\u003eWork completed consists of::\u003c\/p\u003e  \u003cp\u003eSilver soldered copper boiler with sliding firehole doors fitted\u003cbr\u003e  Hornplates\u003cbr\u003e  Wheels, fitted with rubber tyres and mounted on axles\u003cbr\u003e  Set of gears, including differential\u003cbr\u003e  Smokebox with door and locking handles, chimney, perch bracket\u003cbr\u003e  Machined crankshaft and flywheel\u003cbr\u003e  Machined steering worm, wheel and bracket assembly\u003cbr\u003e  Flanged endplates for belly tank\u003cbr\u003e  Part-machined connecting rods\u003cbr\u003e  Tender\u003c\/p\u003e  \u003cp\u003eIn addition, there are unmachined castings for:\u003c\/p\u003e  \u003cp\u003eSteering wheel\u003cbr\u003e  Crankshaft bearing housings\u003cbr\u003e  Weighshaft\/guide bar bracket\u003cbr\u003e  Governor\u003cbr\u003e  Cylinder block\u003cbr\u003e  Material for boiler cladding bands\u003c\/p\u003e  \u003cp\u003eLength 28 inches\u003cbr\u003e  Height 20 inches\u003cbr\u003e  Width 12 inches\u003c\/p\u003e","brand":"Station Road Steam","offers":[{"title":"Default Title","offer_id":54009507512661,"sku":"1706","price":95.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1023\/0094\/2677\/files\/1706-1.webp?v=1779897970"},{"product_id":"part-built-5-inch-gauge-princess-of-wales-stock-code-1817","title":"Part-built 5 inch gauge \"Princess of Wales\"","description":"Complete set of Reeves castings, drawings and all Model Engineer's covering  the build of this Martin Evans design for the Midland Railway 4-2-2 single wheeler  with 8 wheel tender.  \u003cp\u003eWork to date is to a high standard and includes:\u003c\/p\u003e  \u003cp\u003e90% complete front bogie\u003cbr\u003e  Frames complete with horns\u003cbr\u003e  Driving wheels and crank axle, complete with eccentric sheaves and axleboxes\u003cbr\u003e  Trailing wheels\u003c\/p\u003e","brand":"Station Road Steam","offers":[{"title":"Default Title","offer_id":54009508036949,"sku":"1817","price":95.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1023\/0094\/2677\/files\/1817-1.webp?v=1779897974"},{"product_id":"disassembled-5-inch-gauge-0-6-0-stock-code-1529","title":"Disassembled 5 inch gauge 0-6-0","description":"\u003cp\u003eAn interesting old engine that deserves a better fate than sitting under the  bench in a wooden crate as it has done for the last twenty years! An 0-6-0  saddle tank, apparently built to a works blueprint - there is a single general  arrangement drawing for the full size engine. Built to a good standard - the  cylinders are well made, iron wheels with separate steel tyres, well-detailed  fittings, full brake gear - but completely dismantled. We have been through the  box and reckon the engine to be over 95% complete. The saddle tank is missing  and, strangely, so too are the main frames although another set are included and almost  complete. Everything wants a good clean to start with, then bolting back  together - even the fasteners have been saved in a big biscuit tin.\u003c\/p\u003e    \u003cp\u003eMuch faster than building from scratch, this would be an interesting project  which would save an unusual old engine.\u003c\/p\u003e    \u003cp\u003e\u003c\/p\u003e","brand":"Station Road Steam","offers":[{"title":"Default Title","offer_id":54009509118293,"sku":"1529","price":275.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1023\/0094\/2677\/files\/1529-1.webp?v=1779897998"},{"product_id":"part-built-minnie-stock-code-1534","title":"Part-built Minnie","description":"\u003cp\u003ePart-built 1 inch scale traction engine to the Len Mason design  \"Minnie\", a freelance agricultural engine. Good workmanship so far  with a complete rolling chassis, crank, second shaft and all gears. Quantity of  castings and material to complete, including flanged tender sides in brass,  winch rope, complete grate, castings for cylinder block assembly, eccentrics, feed pump etc. Includes a  complete set of drawings.\u003c\/p\u003e    \u003cp\u003eCastings are still available for this popular engine.\u003c\/p\u003e    \u003cp\u003eThe completed engine is 18 inches long, 12 inches high at the chimney. To see  a picture of a finished \"Minnie\" which we sold last year, \u003ca href=\"Minnie.htm\"\u003eclick  here\u003c\/a\u003e.\u003c\/p\u003e    \u003cp\u003e\u003c\/p\u003e","brand":"Station Road Steam","offers":[{"title":"Default Title","offer_id":54009509314901,"sku":"1534","price":650.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1023\/0094\/2677\/files\/1534-1.webp?v=1779897999"},{"product_id":"3-inch-part-built-burrell-agricultural-engine-stock-code-1537","title":"3 inch part-built Burrell agricultural engine","description":"\u003cp\u003eA part-built Burrell agricultural traction engine in 3 inch scale to the  popular H.R.Plastow design. Since these pictures were taken, the engines has  been carefully bead-blasted back to clean metal ready for priming.\u003c\/p\u003e  \u003cp\u003eWork to date comprises complete front end - smokebox with door and dart  assembly, perch bracket, front axle, front wheels and chimney. Finished  crankshaft fitted with valve and pump eccentric straps and sheaves. Boiler feed  pump with plunger. Cylinder block bored with ends and valve chest faced. Piston  and rod. Machined flywheel. Steering gear complete. Hornplates with bearings and  crankshaft lubricators. All gears cut and shafts machined, including complete  differential assembly, winch and brake drum. Complete gear selector mechanism.  Rear axle with one complete wheel, the other in kit form comprising rim, hub and  cap casting, laser-cut spokes and building jig.\u003c\/p\u003e  \u003cp\u003eThere is also one flanged tender side in stainless steel and sufficient new  sheet to complete the tender (should you be brave enough to attempt to make it  in stainless!). The boiler shell and (unfitted) firebox are of indifferent  quality and should be regarded as useful to separate the wheels while you make a  new boiler. A new professionally-built boiler in copper with test certificate  would cost £850.\u003c\/p\u003e  \u003cp\u003eA full set of drawings are included.\u003c\/p\u003e  \u003cp\u003eThe completed engine will be 44 inches long, 29 inches to the top of the  chimney and weigh around 300 pounds. Castings are still available from Stuart  Models who took over the Plastow range of traction engine models some years ago.\u003c\/p\u003e  \u003cp align=\"center\"\u003e\u003c\/p\u003e","brand":"Station Road Steam","offers":[{"title":"Default Title","offer_id":54009509871957,"sku":"1537","price":895.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1023\/0094\/2677\/files\/1537-1.webp?v=1779898001"},{"product_id":"approx-1-14-inch-scale-part-built-portable-engine-stock-code-1573","title":"Approx 1 1\/4 inch scale part-built portable engine","description":"\u003cp\u003eBeginnings of a portable engine at about 1 1\/4 inch scale. Copper boiler  shell with cylinder block mounted and valve gear fitted.\u003c\/p\u003e    \u003cp\u003eLength 12 1\/2 inches\u003cbr\u003e  Boiler 3 3\/4 inch diameter\u003cbr\u003e  Flywheels 4 1\/2 inch diameter\u003c\/p\u003e    \u003cp\u003e\u003c\/p\u003e","brand":"Station Road Steam","offers":[{"title":"Default Title","offer_id":54009510756693,"sku":"1573","price":25.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1023\/0094\/2677\/files\/1573-1.webp?v=1779898006"},{"product_id":"part-built-3-12-inch-gauge-britannia-stock-code-1600","title":"Part-built 3 1\/2 inch gauge Britannia","description":"\u003cp class=\"MsoNormal\"\u003eAn absolutely superb part-built Britannia, to the LBSC  design. Rolling chassis with valve gear, complete boiler requiring final  soldering, finely-detailed smokebox, complete tender rolling chassis.\u003c\/p\u003e    \u003cp class=\"MsoNormal\"\u003eThis locomotive has been built to exhibition standard,  with most of the hard work done. The chassis is running on air, the boiler  almost complete. The engine requires platework and fitting out to produce an  absolutely magnificent model.\u003c\/p\u003e    \u003cp class=\"MsoNormal\"\u003eComplete with set of drawings, full set of \"Model  Engineer\" magazines containing the original LBSC \"words and  music\", large quantity of parts and fittings, grate, ashpan and a completed  copper superheater.\u003c\/p\u003e    \u003cp class=\"MsoNormal\"\u003eLength locomotive 33 inches\u003cbr\u003e  Length tender 18 inches\u003c\/p\u003e    \u003cp class=\"MsoNormal\" align=\"center\"\u003e\u003c\/p\u003e","brand":"Station Road Steam","offers":[{"title":"Default Title","offer_id":54009510953301,"sku":"1600","price":1795.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1023\/0094\/2677\/files\/1600-1.webp?v=1779898007"},{"product_id":"part-built-5-inch-gauge-bulldog-stock-code-1601","title":"Part-built 5 inch gauge Bulldog","description":"\u003cp\u003eA well-made chassis in 5 inch gauge for a GWR Dukedog 4-4-0 to the Keith  Wilson design, published in Model Engineer.\u003c\/p\u003e    \u003cp\u003eThis is a well-detailed chassis. The wheels are fitted and well-quartered,  the crank axle is made and fitted with eccentric sheaves. The boiler comprises  all tube material and flanged plates. In addition there are 5 machined wheels  for the tender, hornblock castings for same and other miscellaneous parts. There  is a complete set of \"Model Engineer\" magazines covering the  construction article by Keith Wilson.\u003c\/p\u003e    \u003cp class=\"MsoNormal\"\u003eLength 33 inches\u003c\/p\u003e    \u003cp class=\"MsoNormal\" align=\"center\"\u003e\u003c\/p\u003e","brand":"Station Road Steam","offers":[{"title":"Default Title","offer_id":54009511018837,"sku":"1601","price":1150.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1023\/0094\/2677\/files\/1601-1.webp?v=1779898007"},{"product_id":"part-built-1-14-allchinfreelance-stock-code-1543","title":"Part-built 1 1\/4 Allchin\/Freelance","description":"\u003cp\u003ePart of a collection of three traction engines by the same builder, this  engine was built in 1961 and has been exhibited several times in its  part-complete state. The builder was working with a set of the Hughes  \"Royal Chester\" drawings for a 1 1\/2 inch scale Allchin. This engine  is closer to 1 1\/4 inch scale but retains the overall Allchin two-speed,  four-shaft layout - it differs in detail from the drawings in various ways,  although the workmanship on both this and the other engines we have from this  builder is good.\u003c\/p\u003e    \u003cp\u003eWork complete to date is silver-soldered copper boiler with grate and ashpan,  cylinder block with trunk guide and regulator, connecting rod, crankshaft and  all gears down to the back axle, which is fitted. Smokebox with chimney and  perch bracket. Well-detailed tender with water pouch and fairleads for winch.\u003c\/p\u003e    \u003cp\u003eWork required includes construction of four wheels and front axle, boiler  feed pump and valve gear (eccentric straps, sheaves and rods, expansion link,  lifting links and weighshaft, slide valve, valve chest cover). There is detail  work involved in cladding the boiler etc.\u003c\/p\u003e    \u003cp\u003eOverall length is 20 inches, with a 5 inch diameter flywheel.\u003c\/p\u003e    \u003cp\u003e\u003c\/p\u003e","brand":"Station Road Steam","offers":[{"title":"Default Title","offer_id":54009511051605,"sku":"1543","price":875.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1023\/0094\/2677\/files\/1543-1.webp?v=1779898009"},{"product_id":"2-12-inch-gauge-4-6-2-chassis-with-boiler-stock-code-1557","title":"2 1\/2 inch gauge 4-6-2 chassis with boiler","description":"\u003cp\u003e2 1\/2 inch gauge Pacific of unknown design. Rolling chassis with wheels,  cylinders and valve chests. Crossheads and coupling rods made and fitted.  Multi-tube coal-fired boiler.\u003c\/p\u003e    \u003cp\u003eLength 20 inches\u003c\/p\u003e    \u003cp\u003e\u003c\/p\u003e","brand":"Station Road Steam","offers":[{"title":"Default Title","offer_id":54009511117141,"sku":"1557","price":80.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1023\/0094\/2677\/files\/1557-1.webp?v=1779898009"},{"product_id":"3-12-inch-gauge-2-6-2-2c-chassis-boiler-stock-code-1566","title":"3 1\/2 inch gauge 2-6-2, chassis \u0026 boiler","description":"\u003cp\u003eWell-made 3 1\/2 inch gauge 2-6-2, 3 cylinders with piston valves. Coal-fired  multi-tube boiler on largely complete rolling chassis with cylinders machined  and outside pair fitted. The connecting rods and forked connecting rods are made  and fluted, a start has been made on the motion work with motion brackets and  expansion links. The crank axle has been made and twin axle-driven feed pumps  fitted.\u003c\/p\u003e    \u003cp\u003eLength 31 inches\u003c\/p\u003e    \u003cp\u003e\u003c\/p\u003e","brand":"Station Road Steam","offers":[{"title":"Default Title","offer_id":54009511313749,"sku":"1566","price":494.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1023\/0094\/2677\/files\/1566-01.webp?v=1779898012"},{"product_id":"1-14-inch-scale-coal-fired-traction-engine-2c-to-complete-stock-code-1569","title":"1 1\/4 inch scale coal-fired traction engine, to complete","description":"\u003cp\u003eAttractively-proportioned traction engine of around 1 1\/4 inch scale,  reputedly using Bassett-Lowke castings. The smokebox door has  \"Burrell\" cast in and the overall lines are similar to a small Burrell  tractor. Work is required to complete the tender, ashpan and gearing. Although  there is no evidence that the multitube boiler has ever been steamed, the engine  itself has obviously been run on many occasions (probably on compressed air via  on of the boiler fitting bushes). Fitted with Stephenson's reversing gear, the  engine has some nice detailing such the rivet work around the belly tanks and  tool box.\u003c\/p\u003e    \u003cp\u003eLength 22 1\/2 inches\u003cbr\u003e  Height 15 inches\u003c\/p\u003e    \u003cp\u003e\u003c\/p\u003e","brand":"Station Road Steam","offers":[{"title":"Default Title","offer_id":54009511575893,"sku":"1569","price":825.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1023\/0094\/2677\/files\/1569-01.webp?v=1779898015"},{"product_id":"gauge-1-4-6-2-chassis-2c-cylinders-2c-cab-stock-code-1559","title":"Gauge 1 4-6-2 chassis, cylinders, cab","description":"\u003cp\u003eFrames, wheels and axles erected, cylinders and valve chests fitted, front  bogie complete. Turns over freely.\u003c\/p\u003e    \u003cp\u003e\u003c\/p\u003e","brand":"Station Road Steam","offers":[{"title":"Default Title","offer_id":54009511641429,"sku":"1559","price":40.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1023\/0094\/2677\/files\/1559-01.webp?v=1779898015"},{"product_id":"part-built-5-inch-gauge-hunslet-stock-code-1550","title":"Part-built 5 inch gauge Hunslet","description":"\u003cp\u003eThis is a part-built locomotive to the Don Young design for Hunslet's  \"Quarry\" class of engine, many examples of which have survived into  preservation after a working life in the Welsh slate quarries. In 5 inch gauge  it produces a good-sized, powerful engine working out at nearly 2 inch scale -  all the parts are easy to handle with no fiddly \"watch-making\"  required.\u003c\/p\u003e    \u003cp\u003eWork completed includes:\u003c\/p\u003e    \u003cp\u003e Frames with stretchers and buffer beams\u003cbr\u003e   Hornblock, hornstays and axleboxes all fitted\u003cbr\u003e   Wheels, axles and flycranks (fitted and quartered)\u003cbr\u003e   Valve eccentric straps and sheaves\u003cbr\u003e   Pump eccentric strap and sheave\u003c\/p\u003e    \u003cp\u003eUnmachined castings included:\u003c\/p\u003e    \u003cp\u003e Valve chests and covers (gun metal)\u003cbr\u003e   Cylinder covers (GM)\u003cbr\u003e   Smokebox door and ring (GM)\u003cbr\u003e   Petticoat pipe (GM)\u003cbr\u003e   Chimney base and cap (cast iron)\u003c\/p\u003e    \u003cp\u003eFittings:\u003c\/p\u003e    \u003cp\u003e Injector\u003cbr\u003e   Pair of water gauges with blowdown valve and glass\u003cbr\u003e   Oil pump ratchet wheel, pawl and spring set\u003cbr\u003e   Water pump\u003c\/p\u003e    \u003cp\u003eIncluded is a professionally-built silver-soldered copper boiler, tested to  200psi for 100 psi working. The workmanship on the chassis so far is good. The  remainder of the castings for this engine are still available from \u003ca href=\"http:\/\/www.ajreeves.com\"\u003eReeves\u003c\/a\u003e\u003c\/p\u003e    \u003cp\u003eI have included a picture of one of the survivors, \"Cloister\" to  give an idea of the size and shape of this attractive engine.\u003c\/p\u003e    \u003cp\u003e\u003c\/p\u003e","brand":"Station Road Steam","offers":[{"title":"Default Title","offer_id":54009511969109,"sku":"1550","price":795.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1023\/0094\/2677\/files\/1550-1.webp?v=1779898017"},{"product_id":"0-6-0-2-12-gauge-chassis-stock-code-1467","title":"0-6-0 2 1\/2 gauge chassis","description":"\u003cp\u003e12 inches long, 5 inches wide. 2 1\/4 inch diameter wheels.\u003cbr\u003e  An interesting old 0-6-0 chassis featuring Walshaerts valve gear. The engine  pushes along very easily without tight spots and appears that it would run on  air.\u003c\/p\u003e  \u003cp\u003e\u003c\/p\u003e","brand":"Station Road Steam","offers":[{"title":"Default Title","offer_id":54009512264021,"sku":"1467","price":50.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1023\/0094\/2677\/files\/1467-1.webp?v=1779898019"},{"product_id":"part-built-3-12-inch-gauge-mountaineer-stock-code-1655","title":"Part built 3 1\/2 inch gauge \"Mountaineer\"","description":"Part-built Alco 2-6-2 tank locomotive, based on \"Mountaineer\"  running on the Ffestiniog Railway.    \u003cp\u003eBased on a 2 foot gauge prototype, this makes a large, powerful model in 3  1\/2 inch gauge, over 1 1\/2 inch scale.\u003c\/p\u003e    \u003cp\u003eRolling chassis with frames, wheels, flycranks, cylinders with pistons, rods,  valve chests and guide bars. Complete flanged copper boiler kit with barrel, all plates and  tubes. Complete smokebox assembly with door, chimney and petticoat pipe. Large  quantity of castings, fastenings, Tufnol strip (for springs) makers and name plates,  complete set of  drawings and \"Model Engineer\" magazines covering the construction of  this locomotive.\u003c\/p\u003e    \u003cp class=\"MsoNormal\"\u003eOverall length 38 inches\u003c\/p\u003e    \u003cp class=\"MsoNor\"\u003e\u003c\/p\u003e","brand":"Station Road Steam","offers":[{"title":"Default Title","offer_id":54009515344213,"sku":"1655","price":795.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1023\/0094\/2677\/files\/1655-1.webp?v=1779898022"},{"product_id":"3-12-inch-gauge-inside-cylinder-4-4-0-chassis-2c-joy-valve-gear-stock-code-1690","title":"3 1\/2 inch gauge inside cylinder 4-4-0 chassis, Joy valve gear","description":"class=\"MsoNormal\"\u0026gt;A project for the determined restorer! An old, very dirty  inside cylindered 4-4-0 chassis with Joy valve gear. It's seized, although  starting to respond to soaking in oil with the valve gear largely free. The  guide bars are quite badly corroded, the rest less so. Mechnical lubricator  fitted. Front bogie missing. It certainly needs stripping and cleaning, but is  not beyond salvation!    \u003cp class=\"MsoNor\"\u003e\u003c\/p\u003e","brand":"Station Road Steam","offers":[{"title":"Default Title","offer_id":54009516097877,"sku":"1690","price":95.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1023\/0094\/2677\/files\/1690-01.webp?v=1779898027"},{"product_id":"part-built-2-inch-scale-thetford-town-stock-code-1707","title":"Part-built 2 inch scale Thetford Town","description":"Early stages of a 2 inch scale Burrell Showmans engine to the highly-detailed  plans by Ronald H.Clark, produced from original Burrell drawings. Based on one  of the largest road locomotives built, at 2 inch scale this design produces a  large, powerful model around four feet long when finished.  \u003cp\u003eWork completed and parts included comprise:\u003c\/p\u003e  \u003cp\u003eFull set of drawings, as new condition\u003cbr\u003e  Boiler barrel, throat plate, outer firebox sides\u003cbr\u003e  Completed front wheels with axle, centre bracket and cap, perch bracket\u003cbr\u003e  Complete smokebox with extended alternator bracket, works plate on front and  chimney base\u003cbr\u003e  Hornplates\u003cbr\u003e  Cylinder block and top cover casting (gunmetal)\u003cbr\u003e  Set of front and rear tyres\u003cbr\u003e  Rear wheel rim material (steel)\u003cbr\u003e  Rear wheel T-rings\u003cbr\u003e  Gear centre, spider and winding drum\u003cbr\u003e  Crankshaft bearing housings\u003c\/p\u003e  \u003cp\u003eCastings for this engine are available from \u003ca href=\"http:\/\/www.ajreeves.com\"\u003eReeves\u003c\/a\u003e\u003c\/p\u003e","brand":"Station Road Steam","offers":[{"title":"Default Title","offer_id":54009516163413,"sku":"1707","price":385.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1023\/0094\/2677\/files\/1707-1.webp?v=1779898026"},{"product_id":"5-inch-gauge-part-built-pansy-0-6-0-stock-code-1751","title":"5 inch gauge part-built Pansy 0-6-0","description":"Largely complete Pannier tank to LBSC's \"Pansy\" design comprising    \u003cp\u003eComplete set of drawings\u003cbr\u003e  Copies of construction articles\u003cbr\u003e  Silver-soldered copper boiler with stainless steel superheaters and backhead  fittings\u003cbr\u003e  Well-made chassis with cylinders, all motionwork and coupling rods\u003cbr\u003e  Platework including cab, bunker, tanks, running boards\u003cbr\u003e  Box of small parts including new lubricator, number plates, scale lamps, grate  \u003c\/p\u003e    \u003cp\u003eThis is a well-advanced project made to a good standard with some nice  detailing in the platework with neat riveting, lamp irons etc.  \u003c\/p\u003e    \u003cp\u003e  \u003c\/p\u003e","brand":"Station Road Steam","offers":[{"title":"Default Title","offer_id":54009516589397,"sku":"1751","price":950.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1023\/0094\/2677\/files\/1751-1.webp?v=1779898029"},{"product_id":"3-12-inch-gauge-princess-marina-chassis-with-complete-tender-stock-code-1767","title":"3 1\/2 inch gauge \"Princess Marina\" chassis with complete tender","description":"Part-built Mogul to LBSC \"Princess Marina\" design, comprising  \u003cp\u003e95% complete well-detailed tender with brake gear\u003cbr\u003e  Rolling chassis complete with wheels, machined cylinders, smokebox saddle and pony truck\u003c\/p\u003e","brand":"Station Road Steam","offers":[{"title":"Default Title","offer_id":54009516622165,"sku":"1767","price":295.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1023\/0094\/2677\/files\/1767-1.webp?v=1779898030"},{"product_id":"3-12-inch-gauge-part-built-9f-2-10-0-stock-code-1750","title":"3 1\/2 inch gauge part-built 9F 2-10-0","description":"Well-made BR 9F to LBSC's \"Evening Star\" design, comprising    \u003cp\u003eComplete chassis running on air, fitted brakes\u003cbr\u003e  Copper boiler with brass cladding and smokebox fitted. Copper superheaters\u003cbr\u003e  Complete tender tank and machined wheels\u003cbr\u003e  Assorted parts including dome, nameplates, smokebox door\u003c\/p\u003e    \u003cp\u003eLength locomotive 30 inches\u003cbr\u003e  Length tender 17 inches\u003c\/p\u003e","brand":"Station Road Steam","offers":[{"title":"Default Title","offer_id":54009517146453,"sku":"1750","price":895.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1023\/0094\/2677\/files\/1750-1.webp?v=1779898033"},{"product_id":"part-built-2-12-inch-gauge-4-6-0-stock-code-1646","title":"Part-built 2 1\/2 inch gauge 4-6-0","description":"Set of frames, stretchers, four buffers, six turned driving wheels and  completed spring front bogie for a 2 1\/2 inch gauge 4-6-0. Good workmanship so  far.","brand":"Station Road Steam","offers":[{"title":"Default Title","offer_id":54009517244757,"sku":"1646","price":40.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1023\/0094\/2677\/files\/1646-1.webp?v=1779898034"},{"product_id":"5-inch-gauge-butch-chassis-stock-code-1754","title":"5 inch gauge Butch chassis","description":"A well-made 5 inch gauge side tank, comprising    \u003cp\u003eComplete set of drawings\u003cbr\u003e  Frames with horns, axle boxes, springs and buffers\u003cbr\u003e  Machined cylinder assemblies complete with pistons, rods and crossheads\u003cbr\u003e  Connecting rods\u003cbr\u003e  Machined frame stretchers and axle pump\u003cbr\u003e  Reversing stand\u003cbr\u003e  Motion brackets\u003c\/p\u003e    \u003cp\u003eCastings for\u003cbr\u003e   Smokebox door, ring and rear\u003cbr\u003e   Chimney\u003cbr\u003e   Dome\u003cbr\u003e   Brake shoes\u003c\/p\u003e","brand":"Station Road Steam","offers":[{"title":"Default Title","offer_id":54009517277525,"sku":"1754","price":295.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1023\/0094\/2677\/files\/1754-1.webp?v=1779898034"},{"product_id":"2-12-inch-gauge-dyak-2c-part-dismantled-stock-code-1759","title":"2 1\/2 inch gauge Dyak, part-dismantled","description":"Part-built\/dismantled \"Dyak\" to the LBSC design. The chassis is very  nicely made and runs well on air. The boiler is copper, silver soldered and part  stripped with regulator out and fittings missing. Dismantled tender. Platework  including cab and running boards missing. Some original blueprints, drawn by  Maskelyne, dated 1934.    \u003cp\u003eLocomotive length 18 inches\u003cbr\u003e  Tender length 11 inches\u003c\/p\u003e","brand":"Station Road Steam","offers":[{"title":"Default Title","offer_id":54009517408597,"sku":"1759","price":395.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1023\/0094\/2677\/files\/1759-01.webp?v=1779898034"},{"product_id":"dismantled-3-12-inch-gauge-juliet-stock-code-1740","title":"Dismantled 3 1\/2 inch gauge Juliet","description":"A partly dismantled 0-4-0 tank locomotive to LBSC's \"Juliet\"  design, serialised in Model Engineer in 1948.  \u003cp\u003eWell made chassis which runs very well at a few psi on compressed air,  outside slide valve cylinders with inside valve chests and Stephenson's  reversing gear. Mechanical lubricator fitted between cylinders and axle-driven  boiler feed pump.\u003c\/p\u003e  \u003cp\u003eCopper boiler with superheater flues. Regulator assembly, inner dome,  superheater and pressure gauge are missing.\u003c\/p\u003e  \u003cp\u003eLength 20 inches\u003c\/p\u003e  \u003cp align=\"center\"\u003e\u003c!--webbot bot=\"Navigation\" S-Type=\"children\"  S-Orientation=\"horizontal\" S-Rendering=\"graphics\" B-Include-Home=\"TRUE\"  B-Include-Up=\"TRUE\" U-Page S-Target startspan --\u003e\u003c!--webbot bot=\"Navigation\" endspan i-checksum=\"0\" --\u003e  \u003c\/p\u003e","brand":"Station Road Steam","offers":[{"title":"Default Title","offer_id":54009517506901,"sku":"1740","price":495.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1023\/0094\/2677\/files\/1740-1.webp?v=1779898036"},{"product_id":"2-12-inch-gauge-part-built-a3-pacific-stock-code-1763","title":"2 1\/2 inch gauge part-built A3 pacific","description":"Old A3 Pacific with part set of drawings which look to be pre-war, possibly  1930s. Water tube boiler for spirit firing, two piston valve cylinders with  Walshaerts gear, dismantled 8 wheel tender. Coupling rods and bits missing  from nearside motion work but the chassis looks as if it would take little to  get it going. No front bogie, cab or running boards.    \u003cp\u003eLocomotive 24 inches\u003cbr\u003e  Tender 14 inches\u003c\/p\u003e","brand":"Station Road Steam","offers":[{"title":"Default Title","offer_id":54009517769045,"sku":"1763","price":60.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1023\/0094\/2677\/files\/1763-1.webp?v=1779898037"},{"product_id":"5-inch-gauge-b1-rolling-chassis-2c-cylinders-and-tender-stock-code-1756","title":"5 inch gauge B1 rolling chassis, cylinders and tender","description":"Part-built B1 to the Martin Evans design, comprising  \u003cp\u003eFull set of drawings\u003cbr\u003e  Complete set of constructional articles\u003cbr\u003e  Flanged boiler kit in copper\u003cbr\u003e  Completed tender fitted with brakes and hand pump\u003cbr\u003e  Locomotive rolling chassis with front bogie, wheels, coupling rods, gunmetal  cylinders fitted\u003cbr\u003e  Smokebox door and ring castings\u003cbr\u003e  Cab sides in brass\u003c\/p\u003e  \u003cp\u003eWork completed is to a good standard\u003c\/p\u003e","brand":"Station Road Steam","offers":[{"title":"Default Title","offer_id":54009517801813,"sku":"1756","price":995.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1023\/0094\/2677\/files\/1756-01.webp?v=1779898039"},{"product_id":"5-inch-gauge-3-cylinder-4-4-0-chassis-stock-code-1692","title":"5 inch gauge 3 cylinder 4-4-0 chassis","description":"class=\"MsoNormal\"\u0026gt;Another one for the more determined restorer! A 5 inch  gauge 4-4-0 chassis, 3 cylinder with piston valves.    \u003cp class=\"MsoNor\"\u003e\u003c\/p\u003e","brand":"Station Road Steam","offers":[{"title":"Default Title","offer_id":54009518326101,"sku":"1692","price":95.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1023\/0094\/2677\/files\/1692-1.webp?v=1779898041"},{"product_id":"3-12-inch-gauge-part-built-schools-2c-chambers-boiler-stock-code-1699","title":"3 1\/2 inch gauge part built Schools, Chambers boiler","description":"\u003cspan lang=\"EN-US\"\u003eIn the 1920s, the Southern Railway needed a powerful  locomotive for hauling heavy trains on the steeply-graded Hastings line. Their  existing 2 cylinder 4-6-0 \"King Arthur\" class was too large and heavy  for the restricted loading gauge, so the Southern's Chief Mechanical Engineer,  R.E.L.Maunsell, designed a new 4-4-0 featuring 3 cylinders to reduce wear by  hammer action on the rails. Named after the great public schools of the day, the  class went into history as the most powerful 4-4-0 ever to work on Britain's  railways.\u003c\/span\u003e    \u003cp\u003e\u003cspan lang=\"EN-US\"\u003eThis is an exceptionally well made 3 1\/2 inch gauge model  of the engine, comprising a complete running rolling chassis featuring 3  cylinders with slide valves actuated by Walshaerts valve gear. The engine turns over  very smoothly, the machining and fitting is of a very high order. The brown  discolouration to the motion in the pictures is due to preservative which will  wipe off with spirit. Steam brakes are fitted with the actuating cylinder just  in front of the rear drag beam.\u003c\/span\u003e\u003c\/p\u003e    \u003cp\u003e\u003cspan lang=\"EN-US\"\u003eThe boiler is professionally made by Chambers, silver  soldered copper construction with superheater. It has the original makers double  pressure hydraulic test certificate.\u003c\/span\u003e\u003c\/p\u003e    \u003cp\u003e\u003cspan lang=\"EN-US\"\u003eThe tender exists as a pair of machined frames fitted with  hornblocks, stays and axleboxes. Two of the six wheel castings are machined, all  axles are made. The main tank is made in brass.\u003c\/span\u003e\u003c\/p\u003e    \u003cp\u003e\u003cspan lang=\"EN-US\"\u003eIn addition to the above, there is a box of parts, fitting  and castings including spectacle plate, one cab side, dome casting, completed  steam turret, castings for steps, buffers and splashers.\u003c\/span\u003e\u003c\/p\u003e    \u003cp\u003e\u003cspan lang=\"EN-US\"\u003eThis engine has been made to a high standard thus far and  would require some time and very little expenditure to build into a first class  model of this elegant design.\u003c\/span\u003e\u003c\/p\u003e    \u003cp\u003eLength\u003cbr\u003e  Locomotive 25 inches\u003cbr\u003e  Tender 16 inches\u003c\/p\u003e    \u003cp align=\"center\"\u003e\u003c!--webbot bot=\"Navigation\" S-Type=\"children\"  S-Orientation=\"horizontal\" S-Rendering=\"graphics\" B-Include-Home=\"TRUE\"  B-Include-Up=\"TRUE\" U-Page S-Target startspan --\u003e\u003c!--webbot bot=\"Navigation\" endspan i-checksum=\"0\" --\u003e  \u003c\/p\u003e","brand":"Station Road Steam","offers":[{"title":"Default Title","offer_id":54009518522709,"sku":"1699","price":1950.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1023\/0094\/2677\/files\/1699-01.webp?v=1779898043"},{"product_id":"part-built-simplex-stock-code-1821","title":"Part-built Simplex","description":"Well-advanced example of the Martin Evans \"Simplex\" comprising  chassis, boiler, completed hand pump, regulator and platework including part-finished tanks, running boards and cab.  The boiler requires fittings and there is a grate but no ashpan. A  complete set of drawings is included.    \u003cp\u003eWork so far is to a good standard, the chassis runs well on air.\u003c\/p\u003e    \u003cp align=\"center\"\u003e\u003c!--webbot bot=\"Navigation\" S-Type=\"children\"  S-Orientation=\"horizontal\" S-Rendering=\"graphics\" B-Include-Home=\"TRUE\"  B-Include-Up=\"TRUE\" U-Page S-Target startspan --\u003e\u003c!--webbot bot=\"Navigation\" endspan i-checksum=\"0\" --\u003e  \u003c\/p\u003e","brand":"Station Road Steam","offers":[{"title":"Default Title","offer_id":54009520259413,"sku":"1821","price":1295.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1023\/0094\/2677\/files\/1821-1.webp?v=1779898047"},{"product_id":"6-inch-scale-burrell-agricultural-engine-stock-code-1824","title":"6 inch scale Burrell agricultural engine","description":"Professionally built by an engineering company in the West Country, this  engine was scaled up one and a half times from a set of 4 1\/2 inch scale  drawings, giving a 6 3\/4 inch scale engine which is just under nine feet long  overall and weighs around one and a half tons. The build started in 1995 and  ceased on the sale of the company, leaving the engine something around 80-90%  complete.    \u003cp\u003eSteel boiler by Franklin \u0026amp; Bell with hydraulic test certificate. All  steel gears, working differential and winch mounted on the rear axle. Most parts  to complete are included: governor assembly, boiler fittings (washout plugs, fusible plug, gauge  fittings, pressure gauge, whistle, clack valves), pump, reversing stand, regulator  assembly, cylinder covers, safety valves complete, smokebox door and rings,  ashpan, grate and damper rod. We are currently making the motion work and expect to have the  engine running on air early this Autumn.\u003c\/p\u003e    \u003cp\u003eIn addition, we have spare parts for a second engine - finished crankshaft,  tender, wheels (rubber tyred), ashpan \u0026amp; grate, piston and rod.\u003c\/p\u003e    \u003cp\u003eWe will quote to finish this engine to any stage required, right through to  fully painted, lined and ready to use.\u003c\/p\u003e    \u003cp\u003eThe engine is bigger than it looks here, given that the driver shown is actually 9  inch scale (our 6 inch scale driver was on the Playstation and unavailable for  photography)\u003c\/p\u003e    \u003cp\u003eLength 108 inches\u003cbr\u003e  Weight 30 cwt\u003c\/p\u003e","brand":"Station Road Steam","offers":[{"title":"Default Title","offer_id":54009520292181,"sku":"1824","price":17500.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1023\/0094\/2677\/files\/1824-1.webp?v=1779898047"},{"product_id":"5-inch-gauge-torquay-manor-chassis-stock-code-1755","title":"5 inch gauge Torquay Manor chassis","description":"A well-engineered set of parts for Martin Evans' \"Torquay Manor\" comprising  \u003cp\u003eComplete set of drawings\u003cbr\u003e  Copies of construction articles\u003cbr\u003e  Locomotive and tender frames\u003cbr\u003e  Machined driving and coupled wheels\u003cbr\u003e  Machined tender wheels on axles\u003cbr\u003e  Locomotive and tender axle boxes\u003cbr\u003e  Locomotive hornstays\u003cbr\u003e  Tender dummy springs\u003cbr\u003e  Couplings\u003cbr\u003e  Smokebox saddle\u003cbr\u003e  Complete front bogie\u003c\/p\u003e    \u003cp\u003eLength locomotive 38 inches\u003cbr\u003e  Length tender 24 inches\u003c\/p\u003e","brand":"Station Road Steam","offers":[{"title":"Default Title","offer_id":54009524978005,"sku":"1755","price":250.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1023\/0094\/2677\/files\/1755-1.webp?v=1779898056"},{"product_id":"3-12-inch-gauge-part-built-tich-stock-code-1883","title":"3 1\/2 inch gauge part-built \"Tich\"","description":"A well-advanced example of LBSC's ever-popular \"Tich\", the engine  that launched a few thousand model engineers on their workshop careers (me  included!).    \u003cp\u003eThis is a large-boilered Tich with Walschaerts valve gear. The chassis is  complete and has been run on air. Workmanship is to a good standard throughout.  The boiler is copper, silver-soldered with superheater flue. There is a quantity  of machined parts with the engine, including part-built regulator, safety valve,  completed hand pump and some boiler fittings. There are unmachined castings for  dome and chimney and a set of drawings.\u003c\/p\u003e    \u003cp\u003eWork remaining is mainly platework (cab and tanks) and boiler fittings.\u003c\/p\u003e    \u003cp\u003eLength 16 inches\u003c\/p\u003e    \u003cp align=\"center\"\u003e\u003c!--webbot bot=\"Navigation\" S-Type=\"children\"  S-Orientation=\"horizontal\" S-Rendering=\"graphics\" B-Include-Home=\"TRUE\"  B-Include-Up=\"TRUE\" U-Page S-Target startspan --\u003e\u003c!--webbot bot=\"Navigation\" endspan i-checksum=\"0\" --\u003e  \u003c\/p\u003e","brand":"Station Road Steam","offers":[{"title":"Default Title","offer_id":54009525043541,"sku":"1883","price":595.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1023\/0094\/2677\/files\/1883-1.webp?v=1779898057"},{"product_id":"3-12-evans-jubilee-rolling-chassis-stock-code-1863","title":"3 1\/2 Evans Jubilee rolling chassis","description":"Rather un-prepossessing at first glance, this is actually a nicely-made LMS  2-6-4 tank locomotive to Martin Evans' well-regarded \"Jubilee\" design  which has been badly stored resulting in surface rust and dirt on almost all  parts. However, everything looks as if it will clean up with fine emery, it turns over freely and is complete bar the valve chest  and cylinder end covers - it would be less than a day's work to have the chassis  running on air.  After stripping and cleaning, it will make a good start to a particularly nice 3  1\/2 inch gauge model.  \u003cp\u003eThe chassis is complete with all motion work, brake gear and twin axle pumps. All wheels  and motion work move freely, the valve gear works smoothly from full forward to  reverse. There is a nearly complete horizontally-split smokebox in copper with  door and saddle.\u003c\/p\u003e  \u003cp\u003eLength 33 inches\u003c\/p\u003e    \u003cp align=\"center\"\u003e\u003c!--webbot bot=\"Navigation\" S-Type=\"children\"  S-Orientation=\"horizontal\" S-Rendering=\"graphics\" B-Include-Home=\"TRUE\"  B-Include-Up=\"TRUE\" U-Page S-Target startspan --\u003e\u003c!--webbot bot=\"Navigation\" endspan i-checksum=\"0\" --\u003e  \u003c\/p\u003e","brand":"Station Road Steam","offers":[{"title":"Default Title","offer_id":54009526157653,"sku":"1863","price":295.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1023\/0094\/2677\/files\/1863-1.webp?v=1779898061"},{"product_id":"5-inch-gauge-part-built-double-ten-coffee-pot-stock-code-1903","title":"5 inch gauge part-built Double Ten \"coffee pot\"","description":"Nicely made vertical boilered engine, utilising a Stuart Double Ten 3\/4 x 3\/4  twin cylinder slide valve engine with slip eccentric reversing, driving the  0-4-0 chassis via chain. The axleboxes are fitted with working steel leaf  springs. Silver-soldered copper boiler.    \u003cp\u003eThere is a box of parts with the engine, including drive chain to connect  engine to axles and a marine flywheel for the engine.\u003c\/p\u003e    \u003cp\u003eLength20 inches\u003c\/p\u003e    \u003cp align=\"center\"\u003e\u003c!--webbot bot=\"Navigation\" S-Type=\"children\"  S-Orientation=\"horizontal\" S-Rendering=\"graphics\" B-Include-Home=\"TRUE\"  B-Include-Up=\"TRUE\" U-Page S-Target startspan --\u003e\u003c!--webbot bot=\"Navigation\" endspan i-checksum=\"0\" --\u003e  \u003c\/p\u003e","brand":"Station Road Steam","offers":[{"title":"Default Title","offer_id":54009526354261,"sku":"1903","price":495.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1023\/0094\/2677\/files\/1903-1.webp?v=1779898063"},{"product_id":"5-inch-maid-of-kent-rolling-chassis-stock-code-1865","title":"5 inch Maid of Kent rolling chassis","description":"Rolling chassis to the LBSC 4-4-0 design. Frames with wheels and axles  fitted, gunmetal cylinder casting for inside cylinder version of the design,  gunmetal smokebox saddle, assembled tender frames. Set of front and rear  buffers.    \u003cp\u003eLength 57 inches\u003c\/p\u003e  \u003cp\u003eLocomotive 36 inches\u003cbr\u003e  Tender 21 inches\u003c\/p\u003e  \u003cp\u003eDriving wheels 7 inch diameter on tread.\u003c\/p\u003e","brand":"Station Road Steam","offers":[{"title":"Default Title","offer_id":54009526518101,"sku":"1865","price":85.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1023\/0094\/2677\/files\/1865-1.webp?v=1779898065"},{"product_id":"12-inch-b1-stock-code-1535","title":"12 inch B1","description":"\u003cp align=\"center\"\u003e\u003c\/p\u003e","brand":"Station Road Steam","offers":[{"title":"Default Title","offer_id":54009526616405,"sku":"1535","price":4900.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1023\/0094\/2677\/files\/1535-1.webp?v=1779898066"},{"product_id":"part-built-5-inch-pacific-with-bogie-tender-stock-code-1862","title":"Part-built 5 inch Pacific with bogie tender","description":"An interesting old engine, part-stripped many years ago for renovation, of freelance Pacific design.    \u003cp\u003eComplete, air-running chassis with outside cylinders, inside valve chests  with Stephenson's valve gear, drain cocks. Screw-reverser in cab. Axle pump fitted.  Steam brakes. Copper  boiler, no backhead fittings. Complete braked 8 wheel bogie tender with brass inner  tank for water and hand pump.\u003c\/p\u003e    \u003cp\u003eAlthough of freelance design, there is much nice workmanship in the engine so  far, with interesting details including a counterbalanced weighshaft and working leaf springs on both locomotive and tender. It will complete into an unusual, large 5 inch gauge locomotive.\u003c\/p\u003e    \u003cp\u003eLength 70 inches overall\u003c\/p\u003e    \u003cp\u003eLocomotive 43 inches\u003cbr\u003e  Tender 27 inches\u003c\/p\u003e    \u003cp\u003eDriving wheels 5 1\/2 inch diameter on tread\u003cbr\u003e  Boiler 6 inch diameter barrel\u003c\/p\u003e    \u003cp align=\"center\"\u003e\u003c!--webbot bot=\"Navigation\" S-Type=\"children\"  S-Orientation=\"horizontal\" S-Rendering=\"graphics\" B-Include-Home=\"TRUE\"  B-Include-Up=\"TRUE\" U-Page S-Target startspan --\u003e\u003c!--webbot bot=\"Navigation\" endspan i-checksum=\"0\" --\u003e  \u003c\/p\u003e","brand":"Station Road Steam","offers":[{"title":"Default Title","offer_id":54009526714709,"sku":"1862","price":1650.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1023\/0094\/2677\/files\/1862-1.webp?v=1779898067"},{"product_id":"7-14-inch-gauge-part-built-locomotion-stock-code-1889","title":"7 1\/4 inch gauge part-built \"Locomotion\"","description":"Complete tender, display track, set of finished wheels, boiler material and  large amount of literature including Reeves and Stephenson Society drawings,  articles, correspondence and photographs of original engine. Built to an  excellent standard thus far, it will complete to a technically interesting and  most unusual model in this gauge.    \u003cp\u003eCastings for this engine are stocked by Reeves.\u003c\/p\u003e    \u003cp\u003eOverall length (locomotive \u0026amp; tender) 36 inches\u003c\/p\u003e","brand":"Station Road Steam","offers":[{"title":"Default Title","offer_id":54009527796053,"sku":"1889","price":750.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1023\/0094\/2677\/files\/1889-1.webp?v=1779898108"},{"product_id":"5-inch-gauge-part-built-crampton-stock-code-1892","title":"5 inch gauge part-built Crampton","description":"Excellent 5 inch gauge model of an early \"Crampton\" type  locomotive. Complete rolling chassis with all motion complete, part-built copper  boiler with flanged plates to complete. Complete set of drawings, articles and  pictures of other completed models.    \u003cp\u003eThe builder had an \"oh b*gger\" moment when machining a hole in the  top of the boiler barrel - it looks like the cutter picked up and gouged metal  around the hole. A patch plate has been made to be soldered over - it will be  concealed under the cladding when finished.\u003c\/p\u003e    \u003cp\u003eBoth this engine and the 7 1\/4 inch gauge \"Locomotion\" came from  the estate of an award-winning model engineer who specialised in early  locomotives and stationary engines.\u003c\/p\u003e    \u003cp\u003eLength\u003c\/p\u003e    \u003cp\u003eLocomotive 29 inches\u003cbr\u003e  Tender 18 inches\u003c\/p\u003e    \u003cp align=\"center\"\u003e\u003c!--webbot bot=\"Navigation\" S-Type=\"children\"  S-Orientation=\"horizontal\" S-Rendering=\"graphics\" B-Include-Home=\"TRUE\"  B-Include-Up=\"TRUE\" U-Page S-Target startspan --\u003e\u003c!--webbot bot=\"Navigation\" endspan i-checksum=\"0\" --\u003e  \u003c\/p\u003e","brand":"Station Road Steam","offers":[{"title":"Default Title","offer_id":54009528090965,"sku":"1892","price":1350.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1023\/0094\/2677\/files\/1892-1.webp?v=1779898110"},{"product_id":"part-built-speedy-with-reeves-boiler-stock-code-1792","title":"Part-built Speedy with Reeves boiler","description":"Part-built chassis for the popular LBSC design \"Speedy\", based on  the heavy 0-6-0 Great Western tank locomotives. There is some light surface  rust, but all brightwork will clean up easily - the work so far is to a good  standard and comprises:    \u003cp\u003eRolling chassis with gunmetal axleboxes, accurately quartered wheels and  coupling rods fitted\u003cbr\u003e  Axle pump fitted\u003cbr\u003e  Piston valve cylinders in gunmetal machined and fitted, complete with pistons and endcovers\u003cbr\u003e  Motion brackets\u003cbr\u003e  Pair connecting rods (one complete and bushed, one unmachined blank)\u003c\/p\u003e    \u003cp\u003eIn addition, there are parts and castings for:\u003c\/p\u003e    \u003cp\u003eSmoke box tube, front ring and smokebox door\u003cbr\u003e  Chimney\u003cbr\u003e  Smokebox saddle\u003cbr\u003e  Sanding boxes (x3)\u003cbr\u003e  \u003c\/p\u003e    \u003cp\u003eThere is a complete set of drawings and the LBSC constructional manual for  this engine. Castings are still available from Reeves and Blackgates.  \u003c\/p\u003e    \u003cp\u003e\u003ca href=\"..\/LBSCimages\/Speedy.htm\"\u003eMore information about \"Speedy\"\u003c\/a\u003e  \u003c\/p\u003e    \u003cp align=\"center\"\u003e\u003c!--webbot bot=\"Navigation\" S-Type=\"children\"  S-Orientation=\"horizontal\" S-Rendering=\"graphics\" B-Include-Home=\"TRUE\"  B-Include-Up=\"TRUE\" U-Page S-Target startspan --\u003e\u003c!--webbot bot=\"Navigation\" endspan i-checksum=\"0\" --\u003e  \u003c\/p\u003e","brand":"Station Road Steam","offers":[{"title":"Default Title","offer_id":54009529008469,"sku":"1792","price":350.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1023\/0094\/2677\/files\/1792-1.webp?v=1779898114"},{"product_id":"3-12-inch-gauge-bar-frame-0-8-0-chassis-stock-code-1564","title":"3 1\/2 inch gauge bar frame 0-8-0 chassis","description":"\u003cp\u003eMassively-constructed bar-framed 0-8-0. \u003c\/p\u003e    \u003cp\u003eLength 27 inches.\u003c\/p\u003e    \u003cp\u003e\u003c\/p\u003e","brand":"Station Road Steam","offers":[{"title":"Default Title","offer_id":54009532383573,"sku":"1564","price":25.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1023\/0094\/2677\/files\/1564-1.webp?v=1779898119"},{"product_id":"part-built-5-inch-gauge-pug-0-4-0-stock-code-1816","title":"Part-built 5 inch gauge \"Pug\" 0-4-0","description":"A kit-built Pug tank, kits 1-8 fully assembled, 9 part-assembled and kits  10-12 new in boxes. All parts and instructions included to complete using hand  tools.  \u003cp\u003eLength 22 inches over buffers \u003c\/p\u003e","brand":"Station Road Steam","offers":[{"title":"Default Title","offer_id":54009532612949,"sku":"1816","price":2250.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1023\/0094\/2677\/files\/1816-1.webp?v=1779898123"},{"product_id":"3-12-inch-gauge-tich-dismantled-stock-code-1976","title":"3 1\/2 inch gauge \"Tich\" dismantled","description":"A project for the determined!    \u003cp\u003eA dismantled though largely complete Walschaerts valve gear, large-boilered  Tich. The chassis runs on air, boiler has had regulator removed and a new one is  supplied. Cab roof and weighshaft missing. Small box of bits includes smokebox  door, boiler fittings including pressure gauge, hand pump and superheater.\u003c\/p\u003e    \u003cp\u003eLength 15 inches\u003c\/p\u003e    \u003cp align=\"center\"\u003e\u003c!--webbot bot=\"Navigation\" S-Type=\"children\"  S-Orientation=\"horizontal\" S-Rendering=\"graphics\" B-Include-Home=\"TRUE\"  B-Include-Up=\"TRUE\" U-Page S-Target startspan --\u003e\u003c!--webbot bot=\"Navigation\" endspan i-checksum=\"0\" --\u003e  \u003c\/p\u003e","brand":"Station Road Steam","offers":[{"title":"Default Title","offer_id":54009532875093,"sku":"1976","price":350.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1023\/0094\/2677\/files\/1976-1.webp?v=1779898123"},{"product_id":"part-built-7-14-inch-gauge-lucky-7-stock-code-1775","title":"Part built 7 1\/4 inch gauge Lucky 7","description":"For those with the larger workshop! I bought this last year intending to  complete and use it myself, little knowing that by the end of the year I would  own three big Baldwins (now four!) including the K36. By way of rationalisation,  this one is now up for sale.    \u003cp\u003eProfessionally built to Don Young's \"Maxi 7\" design of the engine  Baldwin built for the two foot gauge Bridgton \u0026amp; Harrison Railroad.  Bar-framed chassis with compensated springing and ball-bearing axle boxes - at  nearly one ton the engine can be pushed along easily by hand. It's close to  running on air, requiring only big ends and eccentric rods to be made. New cast  iron pistons on stainless steel rods are supplied, along with piston rings.\u003c\/p\u003e    \u003cp\u003eThe boiler was built by Franklin \u0026amp; Bell four years ago and has all  paperwork and its initial hydraulic test, constructed of 10mm plate (ie: it will  last longer than you will!).\u003c\/p\u003e    \u003cp\u003e7 1\/4 inch versions of this well-proven Don Young design are scarce and  well-suited to heavy duty commercial work. Castings are still available from  Reeves, a full set of drawings is included.\u003c\/p\u003e    \u003cp\u003eThe prototype engine, #7, survives preserved at the Edaville Railroad Museum  in Massachusetts.\u003c\/p\u003e    \u003cp\u003eLength 120 inches\u003cbr\u003e  Weight complete 1 ton\u003c\/p\u003e","brand":"Station Road Steam","offers":[{"title":"Default Title","offer_id":54009533006165,"sku":"1775","price":6750.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1023\/0094\/2677\/files\/1775-1.webp?v=1779898125"},{"product_id":"5-inch-gauge-part-built-stirling-single-stock-code-1931","title":"5 inch gauge part-built Stirling single","description":"An old part-built model of a Stirling single, the 4-2-2 express engine  designed for the Great Northern Railway at the height of the \"Race to the  North\". The magnificent original \"No.1\" resides in the National  Railway Museum and combines a Victorian elegance with a purposeful look of speed  - if it sounds like I have a soft spot for these engines, as a small boy growing  up in Stamford, there was, in the town library, a 5 inch gauge Stirling single  on display in a glass case. Many were the afternoons on my way home from school  that I would end up there with my nose pressed against the glass!    \u003cp\u003eThis is not exactly a glass-case model, but rather a curiosity. The chassis  is complete, with all motion work, axle pump and lubricator. It  appears to be quite old, possibly pre-war. The boiler is of more recent  manufacture and untidy construction although it is substantially built. We don't  have a set of drawings for this engine although included is a set of Reeves  drawings for the Stirling single which will give a good idea on the platework  required for finishing the locomotive and full details of the tender. There is  also a set of tender wheel castings, grate and safety valve cover along with a  set of steel boiler formers.\u003c\/p\u003e    \u003cp\u003eLength 28 inches \u003c\/p\u003e    \u003cp align=\"center\"\u003e\u003c!--webbot bot=\"Navigation\" S-Type=\"children\"  S-Orientation=\"horizontal\" S-Rendering=\"graphics\" B-Include-Home=\"TRUE\"  B-Include-Up=\"TRUE\" U-Page S-Target startspan --\u003e\u003c!--webbot bot=\"Navigation\" endspan i-checksum=\"0\" --\u003e   \u003c\/p\u003e","brand":"Station Road Steam","offers":[{"title":"Default Title","offer_id":54009534611797,"sku":"1931","price":395.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1023\/0094\/2677\/files\/1931-1.webp?v=1779898132"},{"product_id":"7-14-inch-gauge-gwr-king-rolling-chassis-stock-code-2012","title":"7 1\/4 inch gauge GWR King rolling chassis","description":"Now don't run away - this isn't as bad as it looks!    \u003cp\u003eA 7 1\/4 inch gauge Great Western King chassis, four cylinder with piston  valves and inside Stephenson's valve gear.\u003c\/p\u003e    \u003cp\u003eMany years ago, somebody made a determined start on this large and powerful  engine working to a good standard. Work done to date comprises:\u003c\/p\u003e    \u003cp\u003eFrames\u003cbr\u003e  Axleboxes, horns and keeps (gunmetal)\u003cbr\u003e  Driving and coupled wheels, quartered and keyed to axles, crankpins fitted\u003cbr\u003e  Crankaxle \u003cbr\u003e  Eccentric sheaves\u003cbr\u003e  Expansion links and inside motion bracket\u003cbr\u003e  Inside and outside piston valve cylinders, bored and fitted to frames\u003cbr\u003e  Frame stretchers\u003cbr\u003e  Outside motion brackets (gunmetal)\u003cbr\u003e  Correct compensated, working leaf springs\u003cbr\u003e  Tender wheels on correct tapered axles\u003cbr\u003e  Smokebox with chimney base\u003c\/p\u003e    \u003cp\u003eSo far, so good. Unfortunately, at that point the project stopped and the  engine languished in the original builder's son's shed for a couple of decades,  acquiring a liberal coating of grime and rust and being bashed around causing  the frames to take some rather odd kinks. However - the grime is largely  superficial and a roll of emery cloth appears to work wonders! Realistically,  shot-blasting would be the answer for most of it, with hand finishing of the  machined bits (crankpins, axles etc) and a little blacksmithing for the frame  extremities. It all pushes along freely, there's a set of castings for the front  bogie wheels and the expansion links came up bright with some paraffin (they  even rock smoothly).\u003c\/p\u003e    \u003cp\u003eSo, impress the chaps down the club (they'll all nudge each other and let  newcomers know that you're the chap building a 7 1\/4 King - an aura of Keith  Wilson-like serenity and experience will surround you) and make some room in my  shed for less than the cost of a set of Rob Roy castings!\u003c\/p\u003e    \u003cp\u003e(If, on the other hand, you really were planning on making a 7 1\/4 King, this  is a quick way to get over £1000-worth of castings with some competent  machining thrown in for free!)\u003c\/p\u003e    \u003cp\u003eDrawings and castings still available from Reeves.\u003c\/p\u003e    \u003cp\u003eOverall length (locomotive) 62 inches\u003cbr\u003e  Driving wheels 10 inch diameter\u003c\/p\u003e","brand":"Station Road Steam","offers":[{"title":"Default Title","offer_id":54009535955285,"sku":"2012","price":350.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1023\/0094\/2677\/files\/2012-1.webp?v=1779898140"},{"product_id":"7-14-inch-gauge-dismantled-0-4-0-saddle-tank-stock-code-1980","title":"7 1\/4 inch gauge dismantled 0-4-0 saddle tank","description":"A large freelance design 0-4-0 saddle tank. The engine was built many years  ago by a college lecturer to his own drawings, although obviously influenced by  Bagnall's small industrial locomotives. In more recent years it was bought as a  running engine for a proposed commercial miniature railway project - the engine  was stripped for an overhaul and that was the last time it steamed (where have I  heard that before?!).    \u003cp\u003e0-4-0 chassis, 2 1\/4 x 3 cylinders with slide valves actuated by Marshall  valve gear. Steel boiler with 18 x 1\/2 inch diameter tubes expanded in. The  regulator was originally an external valve which is missing, along with the  pressure gauge.\u003c\/p\u003e    \u003cp\u003eAlthough the engine has languished for many years, there is enough decent  engineering in it to make a worthwhile rebuild. It's a large engine, similar in  size and proportion to a \"Sweet William\" (itself a model of the  Bagnall W class). The chassis turns over easily  and would be no more than a morning's work to have running on air - indeed the  engine could be got back working as a \"running restoration\" without a  great deal of work. It is shown here loosely assembled, I also have the boiler  cladding.\u003c\/p\u003e    \u003cp\u003eLength 48 inches\u003cbr\u003e  Height 36 inches\u003cbr\u003e  Weight approx 400 pounds\u003c\/p\u003e","brand":"Station Road Steam","offers":[{"title":"Default Title","offer_id":54009538937173,"sku":"1980","price":2750.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1023\/0094\/2677\/files\/1980-1.webp?v=1779898146"},{"product_id":"3-12-inch-gauge-juliet-0-4-0t-stock-code-1945","title":"3 1\/2 inch gauge \"Juliet\" 0-4-0T","description":"One of LBSC's more popular beginner's designs for 3 1\/2 inch gauge,  \"Juliet\" is an 0-4-0 contractors type tank locomotive which is small  enough to be easily handled yet not as fiddly as a \"Tich\" to fire and  keep in steam.    \u003cp\u003eSilver-soldered superheated copper boiler fed by axle pump with  auxiliary hand pump in side tank. There is an unused side feed on the boiler  which could be used for an injector. Whistle mounted under running board. Outside cylinders with inside valve chests and  Stephenson's valve gear. Displacement lubricator behind front buffer beam.\u003c\/p\u003e    \u003cp\u003eThis engine needs restoration and a repaint but is complete and turns over  freely.\u003c\/p\u003e    \u003cp\u003eLength 20 inches \u003c\/p\u003e","brand":"Station Road Steam","offers":[{"title":"Default Title","offer_id":54009539330389,"sku":"1945","price":50.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1023\/0094\/2677\/files\/1945-1.webp?v=1779898149"},{"product_id":"7-14-inch-gauge-lb-baldwin-lyn-for-completion-stock-code-1965","title":"7 1\/4 inch gauge L\u0026B Baldwin \"Lyn\" for completion","description":"3 inch scale model of the \"Lynton \u0026amp; Barnstaple Baldwin tank locomotive  \"Lyn\". The railway was opened with three new locomotives built in  England by Manning Wardle, it quickly becoming apparent that more motive power  would be required. Manning Wardle were unable to supply due to a strike so the  contract for a new engine went to Baldwin of Philadelphia in 1898. The engine  was built in double-quick time and shipped over, where it joined Lew, Exe and  Taw on the railway, taking the name \"Lyn (all the locomotives were named after  local rivers).    \u003cp\u003eThe railway teetered on the edge of financial viability for much of its life,  finally being sold off at an auction held on the premises. \"Lyn was cut up in her  shed the day after the auction, along with two of the Manning Wardles and most  of the rolling stock. One of the original engines is still unaccounted for,  believed to be somewhere in South America. Sadly, the charming little narrow  gauge railway did not fit at all with the mainline and speed obsessed ideas of  Captain Howey who attended the auction and was, quite possibly, the one man  there who could have written a cheque for the lot. Then again, if he had bought  the L\u0026amp;B, we would never have seen the Romney, Hythe \u0026amp; Dymchurch (and one  could argue long into the night on the relative merits of each!).\u003c\/p\u003e    \u003cp\u003eA powerful engine, the 2-4-2 wheel configuration allows for working on tight  radius curves both in full size and the model. The professionally-built steel boiler is fed by twin  injectors and an axle pump and fitted with twin safety valves. Two water gauges  are fitted with blowdowns. The cast iron cylinders are fitted with slide valves  actuated by inside Stephenson's valve gear with pole reverser in the cab. All  axles run in ball races and the engine, despite its weight, is easy to push  around by hand. The  rear of the cab can be removed for access to the controls when driving (although  \"Jack, at six, fits comfortably sitting on the bunker of our other  \"Lyn\" with his feet on  the footplate!).\u003c\/p\u003e    \u003cp\u003eThe standard mild steel water tanks have been replaced on this engine with  some rather nicely made stainless steel ones.\u003c\/p\u003e    \u003cp\u003eThis engine is around 85% complete, with mainly plumbing up to finish. We  also have a complete specimen which I used last year and is currently being  reassembled and painted in the post-1926 Southern livery. By ingenious design,  the engine was built for easy conversion between 7 1\/4, 7 1\/2 and (believe it or  not) 5 inch gauge. I'm not sure we'd recommend the 5 inch option, although it  could be quite a challenge running it your club raised level track.\u003c\/p\u003e    \u003cp\u003eWe would be happy to quote to complete this engine if required.\u003c\/p\u003e    \u003cp\u003eLength 76 inches\u003cbr\u003e  Height 27 inches\u003cbr\u003e  Weight approx 1200 pounds\u003c\/p\u003e","brand":"Station Road Steam","offers":[{"title":"Default Title","offer_id":54009540313429,"sku":"1965","price":6500.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1023\/0094\/2677\/files\/1965-1.webp?v=1779898154"}],"url":"https:\/\/stationroadsteam.com\/collections\/projects.oembed?page=37","provider":"Station Road Steam","version":"1.0","type":"link"}